Instruction manual

Model 1040/XL User Instructions 67
Specifications
Power Input: 10 to 18 volts, DC negative ground
400ma at 8 350 weigh-bar load
Display: 1.1 inch (Model 1040) 2.0 inch LCD (Model 1040XL), 6 Digits, 14 segment alpha-
numeric, fiber optic backlight
Display Rate: 1, 2, or 5 times per second
Enclosure: Water/dust resistant, structural polycarbonate, 8.50” high x 10.5” wide x 6.0” deep
IP65 Water resistant
Capacity Range: Up to 200,000 lb/kg
Increment sizes: .01,.02,.05,.1,.2,.5,1,2,5,10,20,50,100,200 lb/kg
Accuracy: +/- 0.1 % of applied load +/- 1 division
Internal A/D resolution: 1,000,000 counts
Operational keys: 0-9 with alpha capabilities, Load/Unload, Gross, Recipe, Usage, Hold, Menu, Print,
Id, Select, Timer, and Zero Clear
Annunciators; Auto, Pen, Load, Gross, Recipe, Ingredient, Alarm, Usage, Motion, Hand-Add, Lb,
and Kg. (12 annunciators)
Audio Output: Audio tone feedback for key contact assurance
Weigh-bar Drive: 10 350 ohm weigh-bars
Serial Ports: 2 RS-232 serial ports programmable for different selectable output formats
(Std, TDM, Broadcast)
Lower Assembly: Connectors for the following: Power, Com1, Com 2, Weigh-bar J-box, Alarm
Output, RD64
Optional Connectors: Speed Sensor Input
There will be seven standard different lower base assemblies:
1. W/T standard 7 pin 5 conn
(pwr/alm/RD64/Com1/j-box)
2. W/T std 7 pin w/options 7 conn
(pwr/alm/speed/RD64/Com1/Com2/j-box)
3. Single conn (AMP) 5 conn
(pwr/alm/RD64/Com1/j-box)
4. Single conn (AMP w/options) 7 conn
(pwr/alm/speed/RD64/Com1/Com2/j-box)
5. *W/T 4 x 5pin w/ Com 1 and RD64 output 8 con
(pwr/alm/RD64/Com1/4-5 pin conn)
6. *W/T 3 x 5pin w/dual RS-232 and RD64 output 7 conn
(pwr/alm/RD64/Com1/3-5 pin conn)
7. *W/T 4 x 4pin w/dual RS-232 and RD64 output 8 conn
(pwr/alm/RD64/Com1/4-4pin conn)
*NOTE: These versions do not offer Speed Sensor input or com 2.