Instruction manual

64 Model 1040/XL User Instructions
Troubleshooting
12.5 Service Repairs
If you find the indicator or one or more of the Weigh Bars® to be defective, contact your
supplier, or send your equipment back to the factory for repair, postage prepaid.
Include the following information:
l Your name and address
l Supplier name and address
l Date of purchase
l Important: An informal note describing symptoms of the problem.
l If possible, the make and model number of equipment the Model 1040 is
used on.
If you need contact or additional information, please access www.agscales.com. If you
would like to purchase a service manual, the PN is 29812-0015.
12.6 Windows
®
Setup
Use HYPERTERMINAL, the communications package in Microsoft Windows to
download information from the Model 1040 to the computer.
Setting up the HYPERTERMINAL icon:
1. Click on the Windows 95 START ICON.
2. Go to Programs, then Accessories, and the click on HyperTerminal
3. Double click on the Hyperterminal ICON, and Execute Hypertrm.exe
4. Enter a name for the connection description
EXAMPLE:M1040 and click on the ICON you choose to use for this
application.
5. Click on OK and it will ask for Phone Number: On the “connect using” scroll to
“Direct to Com 1” and click on OK.
6. Now comes up with COM1 properties, select the following settings:
Bits per second: 9600 (std default baud rate for the Model 1040 or any other
baud rate as long as it matches the Model 1040)
Data bits: 8
Parity: None
Stop bits: 1
Flow control: Xon/Xoff
7. Click on OK and then select File, and Save.
You must have Microsoft Windows
®
95, 98, XP, Windows 2000 or Windows 7.