Instruction manual

48 Model 1040/XL User Instructions
Other Operations
6. Press the MENU key several times until the pen to view is displayed…
PEN.XXX is displayed.
7. Press the SELECT key …
PEN.XXX accumulator is displayed.
8a. Press the SELECT key …
PEN.XXX is displayed
OR
8b. Press MENU key…
PEN.YYY is displayed
9. Repeat steps 7-8b until done viewing accumulators.
10. Press GROSS…
PENS is displayed.
11. Press GROSS to return to the gross weighing mode.
9.6 The XM64 Transmitter/Receiver
The XM64 transmitter serves a variety of functions depending on the mode the
indicator is setup for. The STD configuration parameter sets the transmitter so it acts
as follows:
1. If you are doing mixer loading (Load/Unload mode):
If you press and release the clicker, the indicator tares to 0.
If you hold the clicker down for more than a second, gross weight is displayed as
long as the clicker button is depressed.
If you hold the clicker button for more than three seconds, the unit remains in the
GROSS mode.
2. If the indicator is in recipe or pen mode:
Press the clicker to advance to the next ingredient. If the last ingredient or pen is
being displayed, it advances to the Gross mode.
If unit is set for AUTO-HOLD the XM64 needs to be pressed twice. If not, the
XM64 only needs to be pressed once.