Instruction manual

Model 1040/XL User Instructions 41
9.2 Batching Recipe (Ingredient Loading Method)
6. Depending on the system configuration…
A. Auto advance- User can enter tolerance and ad-delay parameters
under the user menu.
If target stays within the tolerance (ING.TOL)setting, and within
advance-delay (dELAY) parameter, the system will automatically
advance to the next ingredient. If target goes over or under user must
use the MENU key to advance forward on the indicator. (AUTO-HOLD
DOESN”T FUNCTION IN THIS MODE).
Once advancing to the next ingredient it will record the previous
Ingredients actual amount loaded into the ingredient accumulators.
B. Manual Advance Method- When amount loaded is close as possible,
either press the MENU key on the model 1040, (or the XM64 transmitter
/receiver if installed), from the front end loader to advance to the next
ingredient.If AUTO-HOLD is turned on user will press the key once to
get into the hold mode. Now the system can be moved and not affect the
target value because of zero shift from moving the mixer. Display will
show HOLD. Pressing the key again once the system has been moved,
will now move to the next ingredient. If this is the last ingredient, the unit
will return to Gross weighing mode.
Please remember a hand-add ingredient is a small ingredient that when
added will be recorded always as target amount instead of actual
amounts.
7. Repeat steps 4-6 until all ingredients are properly loaded.
8. If configured for AUTO-mix, after the last ingredient Is loaded, pressing the
MENU key or the XM64 will access the mix timer countdown…
either ST: XX:XX for self adjusting time
Or TC: XX:XX for standard timer
After mixer counts down, alarm light comes on, and unit will return to the
gross mode after pressing the MENU, or GROSS key.
9. Now proceed to unload to the appropriate pen. (See Pen Unloading on page
43)
10. Also if unit is setup for AUTO-PRINT, the following printout will be printed if a
printer is installed:
12/20/11 Batch1
IdNumber:
123456
Recipe1: FR-COW
LoadAmount: 10000lb
Time Description Target Actual
12:01PM CORN
4000lb 3900lb
12:10PM HAY-1 3000lb 3030lb
12:20PM COTTON 3000lb 2980lb
TOTAL
10000lb 9910lb
Time PenName
Target Actual
12:40PM PEN-1
5000lb 5050lb
12:50PM PEN-2
5000lb 4900lb