Instruction manual

36 Model 1040/XL User Instructions
Recipes and Pens
8.5.4 Inserting Ingredients
Doing an insert will insert the new ingredient in front of the displayed ingredient.
1. Access the recipe you want to edit, see Figure 8.1, and use the MENU and
SELECT keys to display the ingredient name where you want to insert the new
ingredient.
2. Press and hold SELECT until ING is displayed.
3. Use the keypad to enter in the ingredient number (X) of a valid ingredient from
the LIST (1-100)…
X is displayed.
4. Press SELECT…
Ingredient name is shown momentarily (ex: CORN-1) and then
AMOUNT is shown.
5. Enter in amount of that ingredient…
Amount entered is shown.
6. Press SELECT…
Next ingredient in the recipe is shown.
7. Press GROSS to return to the gross weighing mode.
8.6 Pens
Pens are used to track the unloading of finished batched recipes. You can store
unloading data for up to 100 pens. This data is saved and can be printed. Data saved
and printed includes the date, time, pen number, pen description, weight unloaded and
total unloaded.
8.6.1 Editing Pen Descriptions
The default names for pens are PEN.001, PEN.002, etc. Follow these steps if you want
to customize the name to a six (6) character description.
1. From the Gross mode, enter pen number (example:56), than press and hold on
PEN key for two beeps (2 sec) then release…
PEN.056 is displayed.
2. Use the keypad to enter in the description (example: PIG-01). Press the
6(PQR) key twice to display..
__ __ __ __ __ P. See Entering Alphanumeric Characters on page 11.
If you enter a number higher than 100, CAN’t will be displayed and the display will
return to the previous display.