Instruction manual

Model 1040/XL User Instructions 27
7.6 ENTRY
3. Press SELECT…
WEIGHT or HEAD.Ct is displayed.
4. Press MENU repeatedly until…
WEIGHT is displayed
5. Press SELECT…
NORMAL or ADJUST is displayed.
6. Press MENU until NORMAL is displayed
7. Press SELECT…
WEIGHT is shown.
8. Press GROSS key…
ENTRY is shown.
9. Press the GROSS key to return to the Gross weighing mode or press MENU
key to move to next menu item.
To setup for standard weight mode with auto-adjust (ENTRY>WEIGHT> ADJUST):
1. From the Gross mode, press and hold the MENU key for two beeps (2 sec),
then release…
LIST is displayed.
2. Press MENU repeatedly until ENTRY is displayed.
3. Press SELECT…
WEIGHT or HEAD.Ct is displayed.
4. Press MENU repeatedly until WEIGHT is displayed.
5. Press SELECT…
NORMAL or ADJUST is displayed.
6. Press MENU until ADJUST is displayed.
7. Press SELECT and WEIGHT is displayed.
8. Press GROSS key…
ENTRY is shown.
9. Press the GROSS key to return to the Gross weighing mode or press the
MENU key to move to the next menu item.
To setup for head count (ENTRY>HEAD.CT):
1. From the Gross mode, press and hold the MENU
key for two beeps (2 sec),
then release…
LIST is displayed.
2. Press MENU repeatedly until ENTRY is displayed.
3. Press SELECT…
WEIGHT or HEAD.Ct is displayed.