Instruction manual

24 Model 1040/XL User Instructions
User Menu
5. Press the SELECT key…
ING.TOL is displayed
6. Press the MENU key to move to the DELAY menu item.
To set or view the DELAY parameter:
1. From the Gross mode, press and hold the MENU key for two beeps (2 sec),
then release…
LIST is displayed.
2. Press the MENU key repeatedly until…
dELAY is shown
3. Press the SELECT key…
Current delay parameter is shown
4. Use the keypad to enter in the new setting…
Entered value is displayed.
5. Press the SELECT key and…
dELAY is shown
6. Press the GROSS key to return to the Gross weighing mode or press the
MENU key to move to the next menu item.
7.5 TIMER
This parameter sets the timer mode for standard time or self-adjusting time. The self-
adjust feature requires the mixer to be fitted with a proximity sensor to sense the speed
of the mixer. Consult nearest distributor.
To set the timer mode:
1. From the Gross mode, press and hold the MENU key for two beeps (2 sec),
then release…
LIST is displayed.
2. Press the MENU key repeatedly until TIMER is shown
3. Press the SELECT key …
TIM.STD or SLF.ADJ is shown
If an XM64 transmitter/receiver is installed into the 1040, press the XM64 button to
advance to the next ingredient. Do not use auto-advance if the 1040 system has
the XM64 option.
Default setting = TIM.STD