Instruction manual

Model 1040/XL User Instructions 23
7.4 ING.TOL & DELAY
4. Press the SELECT key…
bAT.CNT is shown
5. Press the GROSS key to return to the Gross weighing mode or press the
MENU key to move to the next menu item.
7.4 ING.TOL & DELAY
ING.TOL stands for Ingredient Tolerance. DELAY stands for ingredient advance Delay.
These two parameters work together to make the Auto-advance feature work. Set
ingredient tolerance as a percentage (1-99) and delay in seconds. See example below
to help understand these items.
Example: Delay parameter is set to 20 seconds
Tolerance is set to 5%
When the ingredient weight being loaded falls within the tolerance and
stays within the tolerance for the time set in the delay parameter, the
indicator will auto-advance to the next ingredient.
If you undershoot the ingredient tolerance, you can advance the ingredient
manually by pressing the MENU key on the 1040. If you overshoot, the
display will alternate between OVR.TOL and the amount overloaded until
the indicator doesn’t sense motion, then it will advance to the next
ingredient.
Follow these steps to set or view the ING.TOL parameter:
1. From the Gross mode, press and hold the MENU key for two beeps (2 sec),
then release…
LIST is displayed.
2. Press the MENU key repeatedly until…
ING.TOL is displayed
3. Press the SELECT key…
Current tolerance setting is displayed.
4. Use the keypad to enter in the new tolerance…
Entered tolerance value is displayed
Auto-advance will take place only if an ingredient tolerance and an advanced delay
parameter have values set at other than 0. If either parameter is set to 0, there will be
no auto-advance.
The default setting is 0 for both parameters. This means auto-advance is disabled.