Instruction manual

22 Model 1040/XL User Instructions
User Menu
7.2 CLR.ACC
The next menu item is CLR.ACC. Under this item you can choose to clear:
l ALL accumulators (the last 100 batch printouts/data and all ingredient, recipe
and pen accumulators)
l BATCH accumulator ((the last 100 batch printouts/data)
l ACCUM (the ingredient, recipe and pen accumulators).
Follow these steps:
1. From the Gross mode, press and hold the MENU key for two beeps (2 sec),
then release…
LIST is displayed.
2. Press the MENU key once…
CLR.ACC is displayed
3. Press the SELECT key…
ALL is displayed.
4. Use the MENU key to move through the choices. Display the one you want to
clear and press SELECT key…
NO is displayed.
5. Press MENU and YES is shown. Press SELECT key…
WAIT is displayed while clearing, then ALL, BATCH, or ACCUM is
displayed.
6. Press GROSS key…
Unit returns to CLR.ACC.
7. Press the GROSS key to return to the gross weighing mode, or press the
MENU key to move to the next menu item.
7.3 BAT.CNT
The next menu item is BAT.CNT. This stands for Batch Counter. The counter starts at
0 and increments each time a recipe is batched. This value is cleared each time the
batched data is cleared under CLR.ACC. This counter goes up to 999999.
Follow these steps:
1. From the Gross mode, press and hold the MENU key for two beeps (2 sec),
then release…
LIST is displayed.
2. Press the MENU key repeatedly until…
bAT.CNT is displayed.
3. Press the SELECT key…
Current batch counter is shown.