Instruction manual

Model 1040/XL User Instructions 21

7.1 LIST

The first item in the user menu, Figure 7.1, is LIST. Use this to edit your ingredient list.

You can have up to 100 ingredients stored in the 1040. By default the names are

ING.001 through ING.100.

1. From gross weighing mode, press and hold MENU for 2 beeps…

LIST is displayed.

2. Press SELECT…

EDIT is displayed.

3. Press SELECT to access the first ingredient in the list…

ING.001 is displayed

Key in the ingredient number you want to edit and press SELECT…

That ingredient is displayed.

You can enter alphanumeric titles for each ingredient using the front

panel keys. See Entering Alphanumeric Characters on page 11

4. Once edited properly, press SELECT then MENU to access the next

ingredient in the list

Press the GROSS key repeatedly to return to the gross weighing mode.

Once edited, these new ingredient descriptions will show up on all applicable printouts

and in the batching process.

To Set Ingredient Description Back to Default Setting

If you want to change back to the default description, access the proper ingredient

and press and hold the ZERO/CLEAR key for 2 beeps and release. ING.CLR will be

briefly displayed and then returns to EDIT.

To Setup Ingredient as a Hand-add

While ingredient name is displayed, press the HOLD key and the Hand-add

annunciator will illuminate. The ingredient will then always be treated as a hand-add

ingredient. Press the HOLD key again to disable the tagging of an ingredient as a

hand-add ingredient.