Instruction manual

20 Model 1040/XL User Instructions
User Menu
7 User Menu
Figure 7 shows the User menu. All the user configurable parameters are set through
this menu. This section deals with each of the items in the menu. You will be referred
back to Figure 7 several times.
To enter the menu, press and hold the MENU key until you hear the unit beep twice (2
seconds). Release the key and the display will show LIST.
Use the SELECT key to move down from a menu item. Use the MENU key to move to
the right in the menu. When you are done configuring one of the menu items, press the
GROSS key to move back up to the menu item.
Figure 7.1 User menu
Press the GROSS key repeatedly to escape from any spot on the menu and return to
the Gross mode.
GROSS
LIST
Enter Ing.
tolerance
0-99%
0=Manual
Enter/view
batch#
0-999999
Enter Ing.
Adv. Delay
0-99 sec.
0=Manual
WEIGHT HEAD.CT
TIM.STD SLF.ADJ
TOLER
CALIB
SET.SPD
Enter a %
speed tolerance
1-99%
12/24 hr
HH MM SS
MM DD YY lb
or
DD MM YY (kg)
OFF LOW MEdIUM HIGH
Enter 1-999
minutes.
0 = off
CLR.ACC ING.TOLBAT.CNT DELAY TIMER
ENTRY TIME DATE VOLUME
NATION
SLEEP
CLR.DAT
ALL
EDIT
ALL
ING.001
BATCH
RECS
ACCUM
PENS INGS
ING.100
NO
NO NO NO NO
NO NOYES
YES YES
YES
YES
YES
YES
MENU key to scroll
SELECT key to move
GROSS key to move
NORMAL ADJUST
ENGLSH
SPANSH
GERMAN
FRENCH
DANISH
DuTCH