Instruction manual

10 Model 1040/XL User Instructions
Introduction
INGREDIENT To indicate unit is in the recipe entry mode, or ingredient entry, or
ingredient accumulators.
ALARM This is on when the user has activated the load/unload or recipe
modes that have made the alarm setpoint active and ready to
activate the alarm light when the proper weight is reached.
USAGE To indicate that the usage mode is activated, whether ingredient,
recipe, or pens, then those annunciators will be activated as
appropriate.
MOTION Turns on when there is motion present, based on the stability
window parameters.
HAND-ADD Appears when editing ingredients and enabling the ingredient as
a hand-add. Then, later when the recipe is recalled, the
appropriate ingredient again will turn on if it is a hand-add.
Lb Turns on if the indicator is programmed for weighing in lb.
AUTO Turns on if the unit is programmed for AUTO ingredient advance.
(or anytime a tolerance and advance delay have been entered).
Kg Turns on if the indicator is programmed for weighing in kg.
2.4 Display Messages
M1040 Message displayed on power up initialization sequence.
HELLO Message displayed on power-up sequence for 3 seconds
ADJ.AMT Indicator configured for self-adjusting mode
HD.CT Indicator configured for head count mode.
WT.AMT Indicator configured for standard weight ingredient entry mode.
(
- - - - - -
) Upper dashes show the indicator is in a state of overcapacity, or
analog input is too high.
(
- - - - - -
) Lower dashes show the indicator is in a state of undercapacity, or
analog input is too low.
PRINT Indicator is transmitting data. Appears after you press the PRINT
key for a second.
PR-X Indicator is showing appropriate quick print, (PR-1 to PR-9) Shows
on the display when the proper quick print has been selected.
PRINT.X Shows on the display when the PRINT key was pressed after a
quick print was selected for printing.
LOW.BAT Alternates on the display between current mode and LOW.BAT
when input voltage is between 8-10 volts.
HOLD Used when hold mode is activated.
CAN’T Usually displayed when trying to enter an invalid data. (EX:
entering in 9999 for a time)
NOPRGM Indicates accessed recipe is not programmed.