Specifications

01/02 Rev. 2.13-02 MANUAL Attachment, Setup, Service, Page 25
TCS
Lid switch
The lid switch is positioned on the top edge of
the stacker housing. A magnet mounted on
the cover activates its contact if the cover is
opened during operation.
Disassembling
1. Remove the left guard.
2. Unscrew the fastening screw (1) of the
switch (2).
3. Detach the plug contact of the connector
cable from the cable tree.
Assembly
1. Initially only loosely screw in the switch
fastening screw (2).
2. Push the switch to the side. The stacker
must stop when the cover is opened by
approx. 4 mm.
Tools
– Allen key size 3
1
2