Specifications

01/02 Rev. 2.13-02 MANUAL Attachment, Setup, Service, Page 23
TCS
Anti-static brush/pusher
Disassembling/assembly
The anti-static brush has a strip of self-
adhesive tape on one side.

Mount the brush with the upper edge
flush with the centre edge of the
pusher (3).
Anti-static brush/material guide
Disassembling/assembly
The anti-static brush has a strip of self-
adhesive tape on one side.

Mount the brush (4) at a distance of
4.5 mm (5) from the bottom edge of the
aluminium part.
3
5
4