Specifications

01/02 Rev. 2.13-02 MANUAL Attachment, Setup, Service, Page 21
TCS
Pusher
Tools
– Allan keys, sizes 1.5 and 2.5
Disassembling
1. Open the plexiglass cover of the
stacker.
2. Unscrew both pushers from their bases
by unscrewing two screws (2)
respectively.
Assembly
1. Loosely screw in the fastening screws
(resp. two) of the two pushers.
2. Shift the cutter carriage until the lower
edge of the pusher (3) lies completely
on the balancer (4).
3. Tighten the screws.
4. Position the left pusher at a distance of
1.6 mm (coin thickness) (5) from the
upper edge of the balancer. Tighten the
grub screw (6).
5. Push the right-hand pusher up to the
stop plate (7) on the guard on the right.
The stop plate must stand at right
angles to the pusher. Tighten the thumb
screw.
1
2
7
4
3
6
5
1
2