Specifications

01/02 Rev. 2.13-02 MANUAL Attachment, Setup, Service, Page 18
TCS
Bottom cutter
1. Connect the stacker to the printer.
2. Loosen bottom cutter setting screw (4).
To do this, unscrew the counter nut (5).
3. Operate the printer (stack).
4. Turn the setting screw in slowly while
the stacker is working; keep one hand
on the OFFLINE button of the printer.
5. Press the OFFLINE button as soon as
the stacker no longer cuts the material,
but only bends it over.
6. Unscrew the setting screw by 1.5 turns,
lock and secure it with paint.
Tools
– Allan keys, sizes 2 and 3
–Socket wrench, size 7
5
4