Service manual

02/10 Rev. 5.04-03 USER + SERVICE MANUAL Status Reports
64-xx – 64-xx Dispenser – DPM – PEM – PM 3000 – ALX 92x – AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t
79
9114 RFID missing
Status Occurs during a firmware update of a RFID module, if no such device was
found.
Measure
 Check the configuration.
The status message is cancelled automatically. The download continues.
9115 AWID missing
Status Occurs during a firmware update of an AWID RFID module, if a RFID
module of another manufacturer was found.
Measure
 Check the configuration.
The status message is cancelled automatically. The download continues.
9116 Ser. Disp. Missing
Status Occurs during a firmware update of a serial operation panel, if no such
device was found.
Measure
 Check the configuration.
The status message is cancelled automatically. The download continues.
9117 Device Unknown
Status Occurs during a firmware update, if the device information in the header is
missing.
Measure
 Switch printer off and on again. Check the configuration.
9118 H8 Update Fail.
Status The update of a H8 device failed.
Measure
 Switch printer off and on again.
9119 H8 missing
Status Occurs during a firmware update of a H8 device, if no such device was
found.
Measure
 Check the configuration.
The status message is cancelled automatically. The download continues.