Service manual

02/10 Rev. 5.04-03 USER + SERVICE MANUAL Status Reports
64-xx – 64-xx Dispenser – DPM – PEM – PM 3000 – ALX 92x – AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t
78
9104 Inv. Data Size
Status Occurs during a download. The size of the sent data doesn´t match the file
size indicated in the header.
Measure
 Switch printer off and on again. Check the download data.
9107 Flash Overflow
Status Occurs during a download. The flash memory on the CPU board is full. No
more data can be loaded.
Measure
 Switch printer off and on again.
9108 Flash Ovf. Diag.
Status Occurs during a download. The flash memory on the CPU board has not
enough free memory space left for diagnose data.
Measure
 Delete data blocks in the flash memory or reduce max. size of the diagnose
data.
9109 Flash Ovf. Params.
Status Occurs during a download. The flash memory on the CPU board has not
enough free memory space left to store the current parameter settings.

After a restart, the parameters are set to “Factory setting”.
Measure
 Delete data blocks in the flash memory.
9110 Flash Write Err.
Status Occurs during a download. The flash memory can´t be accessed for writing.
Measure
 Switch printer off and on again.
9111 PIC Update Fail.
Status Occurs during a firmware update or a PIC-controlled device, if the update
failed.
Measure
 Switch printer off and on again.
9112 PIC missing
Status Occurs during a firmware update of a PIC-controlled device, if no such
device was found.
Measure
 Check the configuration.
The status message is cancelled automatically. The download continues.
9113 RFID Update Fail.
Status Occurs during a firmware update of a RFID module, if the update failed.
Measure
 Switch printer off and on again.