Service manual

02/10 Rev. 5.04-03 USER + SERVICE MANUAL Status Reports
64-xx – 64-xx Dispenser – DPM – PEM – PM 3000 – ALX 92x – AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t
57
5532 CMD not avail.
Status The sent command cannot be executed at the moment.
Measure
 Check, if all system components match the spezifications.
5540 ISO error #1
Status Faulty system configuration. Possible reasons may be:
•
Faulty firmware version of the reader
•
The applied transponders doesn´t match the reader.
Measure
 Firmwarestand des Readers überprüfen.
 Die verwendeten Transponder mit der Spezifikation des Readers
vergleichen, evtl. andere Transponder verwenden.
5541 ISO error #2
 See ISO error #1 .
5542 ISO error #3
 See ISO error #1 .
5543 ISO error #15
 See ISO error #1 .
5544 ISO error #16
 See ISO error #1 .
5545 ISO error #17
 See ISO error #1 .
5546 ISO error #18
 See ISO error #1 .
5547 ISO error #19
 See ISO error #1 .
5548 ISO error #20
 See ISO error #1 .
5549 ISO error ???
 See ISO error #1 .