Service manual

02/10 Rev. 5.04-03 USER + SERVICE MANUAL Status Reports
64-xx – 64-xx Dispenser – DPM – PEM – PM 3000 – ALX 92x – AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t
15
1087 OLV not active
Status OLV- specific Easy Plug commands have been used (#OLVI or #OLVD),
without having set the printer to OLV use at first.
Measure
 Set the printer to OLV use.
 See parameter INTERF. PARAM > COM2 PORT > Function Option.
1088 No realtimeclock
Status RTC-specific Easy Plug commands have been used (#YS or #YC), without
having a RTC installed.
Measure
 Install a RTC.
 For details refer to the Service Manual, topic section "General Service",
chapter "Assembling accessories" / "Option board".
1089 Seek Fkt. Error
Status General software error. An error occured while processing the function
„seek“ in the internal file system of the printer.
Measure
 Confirm by pressing the Online button.
 Please read the notes in section General software errors .
1090 Incomplete Job
Status The actual print job was not terminated by the #Q command. In other
words, after a start command #ER for a label format follows another #ER
command without the first format being terminated by #Q.
Measure
 Confirm by pressing the Online button.
 Terminate the print job with a #Q command.
1091 Wrong var field
Status An error occured while interpreting the text string of a variable data field.
The error could e.g. be caused by a #YT or a #YB command (Easy Plug).
Self-acknowledging error.
Measure
 Check the text strings of variable data fields.
1092 Rename file
Status General software error
Measure
 Please read the notes in section General software errors .
1093 Delete file
Status File cannot be deleted.
Measure
 Check whether the file name is written correctly; check whether the file is
write-protected.