User`s manual

44 User’s Manual—SNAP™ 700 Printer
4.4 Printer Features
The SNAP 700 printer has many operator-controllable features. Each of these
features can be selected from the Virtual Control Panel (see section 8.0) Unless
otherwise noted, locate these features on the Options tab or the Virtual Control
Panel.
4.4.1 Selecting the Printer Language
The SNAP 700 printer has the capability of presenting both text and voice
messages in multiple languages.
The printer is shipped with English as the only language.
Other languages must be installed separately. Contact your
local AVERY DENNISON Representative for information about
what languages are available and how to install another
language.
In the Virtual Control panel, access the Options tab. Click on the arrow in the
Language box to drop down a list of available languages. Click on the desired
language. Click “Apply” to activate the selected language.
Selecting the printer language does not change the
PCMate Platinum language. See the PCMate Platinum
manual for information about changing languages.
4.4.2 Setting the Date and Time
The SNAP 700 printer has a built-in clock and calendar. Change the date and
time as follows:
In the Virtual Control Panel, access the Options Tab. Observe the current printer
date and time. Change the values in the Date or Time box, or click on the “Sync
to PC” button to set the printer to the same date and time as the PC. Click on
“Apply” to set the printer date and time.
4.4.3 Enabling or Disabling the Cutter
You may disable the cutter in order to use an accessory such as a Rewinder. If
the cutter is enabled, it will cut according to the Cut Count selected in the format.
If the cutter is disabled, it will not cut.
The Sonic Knife, if installed, will also be enabled or
disabled using this command.
In the Virtual Control Panel, access the Options tab. Click on the arrow in the
Cutter box. Select “Enabled” to run the cutter or “Disabled” to turn it off.


