User`s manual

User’s Manual—SNAP™ 500 Printer

Installation – Rear Cover

1) Insert the Template supplied into the Cover hole above and closest to the

above Verifier / Bracket Assembly. Bending the Template slightly to match

the Cover contour will assure a more accurate location.

TEMPLATE

2) Scribe a line around the inner cutout of the Template.

3) Remove the Template and with a small saw or Dremel Tool, remove the

Material within the scribed line. Slide the Cover onto the Printer to assure a

clearance around the Verifier Bracket.

4) Reassemble cover using Screws removed in Step 3 of Installation

Procedure – Mechanical.