User`s manual

User’s Manual—SNAP™ 500 Printer 83
Electrical 90-132 / 180-265 VAC 50-60Hz - 10 / 6 Amp 1 Ph User selectable
Temperature
40°F (4°C) to 95°F (35°C)
Humidity 5% to 90% non-condensing
Other
Features
- Downloading of information while machine is operating
- Sequenced Fields
- Time/Date Stamping (Both month/day/year and day/month/year format)
- Life Counts – Through PCMate or Remote Control/Display Module
- Operator adjustable: Contrast – Adjustable on printhead
-
Cut position, print position and baud rate – Adjustable through PCMate
virtual display or optional remote display
- Error Detection of: Stock out, ink out, print head open, feed open, full stacker,
stacker jam, and print head over-temperature – with voice commands.
- Display: Labels left to be cut and stacked in a batch, batch ID, total life inches,
total life cuts
- Self Diagnostics – Through PCMate
- Missed sense mark detection and correction
Ink Ribbon AVERY DENNISON standard thermal colors and widths
AVERY DENNISON white plastic core: Maximum Ink I.D. 3.5”
Ink widths:
With Metric Adapter - 25mm, 30mm, 35mm 40mm, 45mm, 50mm or 60mm
metric widths only.
With Inch Adapter - 1”, 1 ¼”, 1 ½” 1 ¾”, 2”, 2 ¼” or 2 ½” inch widths only.
Options - Remote Control / Display Module
- Back reflective sensor — Reads black sense mark printed on back of white
preprinted tape, centered in web.
- Contrast sensor — Reads sense mark printed on front of preprinted tape. Sense
mark or tape may be colored.
- Bar code verifier — Scans every bar code printed. Stops printer if a bar code does
not scan.
Default
Serial Port
Setup
The default serial port configuration is 115,200 baud, no parity, 8 data bits, 1 stop bit