User`s manual

50 User’s Manual—SNAP™ 500 Printer
Reach underneath and remove the print head assembly from the print
station.
Figure 17a. Unplugging Print Head Cable Figure 17b. Two Tabs on Print Station - Depressed
Figure 17c. Print Head Assembly – Removed Figure 17d. Inserting Print Head Assembly
Figure 17e. Print Head Assembly Figure 17f. Print Head
6. Place the new print head assembly onto the plastic mount bracket
underneath the print station (see Fig. 17c and 17d). Push it up until it clicks
into position.
7. Reconnect the print head cable connectors, making sure that the connectors
are seated tightly.