User`s manual

28 User’s Manual—SNAP™ 500 Printer
3.3 Printing Labels
3.3.1 The Control Panel
The Control Panel on your AVERY DENNISON SNAP 500 printer is located at
the top of the machine. Figure 11 shows the control buttons and lights displayed
on the printer. The buttons allow you to control the printer, and the lights
indicate the status of the printer.
• The Start Button starts and stops printing. If there are labels ready to print,
pressing the Start Button starts printing. If the printer is running, pressing
the Start Button stops printing.
• The Ready Light indicates the printer has been powered up, completed its
diagnostics, and is ready to accept Print Jobs.
• The Data Light indicates you have sent a Print Job to the printer and it is
ready to print.
• The Supply Light indicates that either the tape or ink supply has run out and
needs reloading, or the stacker is full. It may also come on if you have an
accessory attached and there is a problem with it.
• The Error Light indicates a problem exists somewhere in the printer.
• If the printer is not printing, pressing the Voice Button will play a message
describing the status of the printer. If the printer is printing, pressing the
Voice Button will stop printing.
Figure 11. Control Panel