User`s manual

26 User’s Manual—SNAP™ 500 Adidas Printer
Feed Roller
Knife
Stacker
Upper Print Roller
Lower Print Roller
Tape Web Guide Knob
Figure 10. Tape Supply Through Knife and Stacker
3.1.4 Using the Web Guide Hole Sensor
The SNAP 500 for Adidas model is equipped with a hole sensing web guide
system. The system includes a pair of sensors that move in and out with the
web guide for “inside” edge hole sensing, and a pair of center mounted, fixed
sensors, for center hole sensing. The user can switch back and forth, between
the edge and center sensing positions by using the provided sensor switch.
See diagram below.
In addition to the web guide hole sensors, the machine is equipped with a tool-
less, quick adjust web guide center system. To fine tune adjust center of print
Web guide
bar with
sensors
Web guide
center a
d
just
Hole sensor switch