User`s manual

User’s Manual—SNAP™ 500 Adidas Printer 25
Upper Print Station
Retraction Fingers
Tape Arbor
Tape (Web) Guide
Lower Print Station
Figure 9. Tape Supply Through Print Stations
7. Pull the roll of tape under the tape (web) guides.
8. Continue threading the tape between the print rollers, through the feed roller
and up to the auxiliary feed.
9. Rotate the black knob on the auxiliary feed counterclockwise and advance
the tape through the knife and nip rollers and into the stacker (until it
extends about ½ inch or 10 mm - 15 mm from the rollers).
10. If the tape will not advance through the knife, refer to Section 5.4.2, Knife
Home Position Adjustment.
11. Close the upper and lower print rollers.
12. Rotate the tape web guide knob to align it to the tape width.
13. Tighten the tape arbor knob to apply tension to the tape.