Instruction manual

2-12 System Administrator’s Guide
Security Disabled
PIN:
123456
Name:
MONARCH PRINTER
Address:
0850123abc2
Name
Use this option to view and set the Bluetooth local name. The name can be up to 15 characters:
upper-case letters A to Z, numbers 0 to 9, and the space character.
The name is used for identification purposes with the host, not authentication. You should use
a logical name for each printer, such as “warehouse”, “receiving dock”, etc.
1. Select Name.
The default or last-saved local name appears, for example:
2. Press D or U to change the highlighted letter. Press L or R to highlight a different letter.
3. When you are finished, press R until you see e. Then, press e to save the setting.
"Name Changed" appears briefly on the display and you return to the Bluetooth menu.
Press X to exit without saving changes.
Info
This option displays the security and PIN settings. Press E. The next screen displays the local
name and address of your Bluetooth printer.
Press E again to return to the Bluetooth menu.
Printing Info
Use this option to print a Bluetooth information label.
1. Select Print Info.
"Reading" appears briefly on the display and then a
Bluetooth information label prints.
The Bluetooth Information label prints the security setting,
the PIN, the local name, and the address of the Bluetooth
device.
Note: The Bluetooth information label also prints as a third
test label when you select Tools, Diagnostics,
Printer, Test Label, Diag Label.
2. You return to the Bluetooth menu.
3. "Please wait updating" appears briefly on the display.
Interpreter
The printer supports both MPCL and MLI (Monarch Language Interpreter™) data. The default is
MPCL. To configure the printer to receive MLI data, refer to the MLI Quick Reference available
on our Web site and on the documentation CD-ROM included with your printer.