Specifications

16
Installation Instructions for Stacker Option 580028 Users Manual Model 500 Downstacker
Installation Instructions for
Stacker Option 580028
(Use with Woven Edge Fabrics less than 1 inch wide & over 4 inches long)
Option consists of:
Part No. Description Qty
588048 Web Guide 1
588049 Long Stacker Mount Shaft 2
Installation Procedure
1. Remove (2) Stacker Mounting Shafts from the Sonic Knife and replace with
(2) 588049 long Stacker Mount Shafts.
REMOVE STACKER MOUNTING
SHAFTS & REPLACE WITH LONG
STACKER MOUNTING SHAFTS (588049)
2. Adjust to allow Stacker to slide freely.
3. With Stacker installed, slide forward and tilt top back as far as possible
without blocking the Platform “Drop” Sensor.
BUTTON HEAD SCREWS MAY NEED
TO BE LOOSED AND THE MOUNT
ARM MAY NEED TO BE SWUNG IN
TOWARDS THE SONIC KNIFE TO
ALLOW THE STACKER TO PASS
FREELY WITHOUT INTERFERING
WITH THE OUTBOARD CONVEYOR