Specifications

2
LOADING SUPPLIES
The printer uses two types of supplies:
 Labels
 Tags
There are two print modes. The way you load the supplies depends on the print mode you use.
 Peel mode removes the backing paper from the supplies as it prints the labels. This mode
allows you to apply the label immediately. It is only for labels. When using the on-demand
sensor, you can press the trigger to print a label or the next label prints automatically when
the previous one is removed.
 Non-Peel mode does not remove the backing paper. It is for tags and labels printed in a
continuous strip.
Loading Supplies 2-1