Specifications

1-4 Equipment Manual
Using the Operator Panel
Button Description
On/Off Turns the printer on and off
Connect Connects the printer with your smart device
Feed/Clear
Error
Feeds supply through the printer or clears the
error condition
Icon Description
Signal Shows the signal strength
Battery Shows the remaining battery power
Status Red=Error
Scan Green = successful scan
Red = unsuccessful scan
Using Bluetooth®
 Your printer with Bluetooth can be paired/connected with a smart device. The exact
pairing/connecting process may differ by device; refer to your smart device manual for
specific instructions.
 Turn your printer on before you pair/connect it with your smart device.
 The printer is automatically discoverable by your smart device.
 Once your smart device is connected to the printer, the printer’s display shows the signal
strength.
 You can press Connect on the printer to reestablish a connection with the last known,
connected smart device.
Helpful Reminders
 Always start with a fully charged battery.
 When you load a new roll of supplies, check the main battery’s printing power, if it is low,
switch to a fully charged battery (doing so ensures optimum print quality).
 Turn off the printer when you are not using it.
 Do not pound the printer when applying labels printed in peel mode.
 Operate and store the printer with the recommended temperature and humidity ranges.
See Appendix A, “Specifications &
Accessories” for more information.