Specifications

4-4 Equipment Manual
Clearing Supply Jams
To clear a supply jam:
1. Turn off the printer and open the supply cover completely.
2. Open the label deflector by gently pushing down on the label deflector.
3. Remove the supplies.
4. Carefully remove any jammed supply.
Note: Do not pull the jammed supply out through the front of the label deflector. Do not use
sharp objects to remove jammed supplies.
5. Clean any adhesive build-up.
6. Reload the supplies, close the supply cover, and close the label deflector.
Storing the Printer
Do not store the printer in or near
 magnetic fields
 wet or damp areas
 dirty or dusty areas
 areas of intense vibration or shock.