Service manual

7-4 Operator's Handbook
Enabling a Script
The script must be enabled before you can use it.
From the Main Menu select Scripts, then follow these steps.
To enable or disable a script:
1. From the Script Menu, press  or  until you see Enable Script.
2. Press CHANGE to view the script enabling options.
Note: If a script is not loaded, CHANGE is disabled and you must press BACK and
return to the previous menu. You see:
3. Press  or  to display either Enable or Disable. Selecting "Enable" starts the
script. Selecting "Disable" stops the script. If you select "Enable," when you turn off
the printer and turn it back on, the script automatically starts.
4. When you see the script enabling setting you need, press SET to save the change.
Press CANCEL to leave the script enabling setting unchanged.
5. If you select “Enable”, the printer automatically returns to the Home/Online screen and
displays ‘Script’ in the upper left corner to indicate the printer has a script loaded and
enabled.
If “Disable” was selected, press CANCEL until you return to the Home/Online screen.
SCRIPTS
←Enable Script→
Enable
CHANGE BACK
SCRIPTS
Enable Script
← Enable →
SET CANCEL
SCRIPTS
←Enable Script→
Disable
SET BACK
Script
Online
FEED TLABEL MENU
SCRIPTS
←Enable Script→
No Script Loaded
CHANGE BACK