Service manual

6-14 Operator's Handbook
Setting the Configuration Packet Mode
You can set how the printer responds to online configuration packets. You can ignore all
online configuration packets by enabling this option. Ignoring these packets is useful
when you cannot change your host’s data or when you want the printer to operate as
specified through the printer’s menu.
Note: We recommend changing your host’s data stream, but if that is not possible,
enable this option.
Use caution if ignoring online configuration packets, because the printer may
need the configuration for proper operation.
To change the setting, from the Main Menu, select Setup, then Defaults. Then, follow
these steps.
1. Press  or  until you see Ignore Config.
2. Press CHANGE to highlight the ignore configuration options. The current setting is
shown.
3. Press  or  to scroll through the ignore configuration options.
4. When you see the ignore configuration mode you need, press SET to save the change.
Press CANCEL to leave the image error mode unchanged.
5. Press BACK until you return to the Home/Online screen.
DEFAULTS
 Ignore Config. 
Disable
CHANGE BACK
DEFAULTS
Ignore Config.
Disablee
SET CANCEL
DEFAULTS
 Ignore Config. 
Disable
CHANGE BACK