Service manual

Setting Defaults 6-3
Setting the Secondary Sign
If you select the dollar as the monetary sign, you can print amounts less than $1.00 either
by using a dollar sign and decimal ($0.30) or by using a cent sign (30¢).
 If you set the secondary sign option to No, prices under $1.00 will print like this: $ .45
 If you set the secondary sign option to Yes, prices under $1.00 will print like this: 45¢
The same option applies to the appropriate secondary sign for monetary signs other than
the dollar.
To change the setting, from the Main Menu, select Setup, then Defaults. Then, follow
these steps.
1. Press  or  until you see Secondary Sign.
2. Press CHANGE to highlight the secondary sign options. The current setting is shown.
3. Press  or  to scroll through the secondary sign settings
4. When you see the secondary sign setting you need, press SET to save the change.
Press CANCEL to leave the secondary sign setting unchanged.
5. Press BACK until you return to the Home/Online screen.
DEFAULTS
Secondary Sign→
No
CHANGE BACK
DEFAULTS
Secondary Sign
← No →
SET CANCEL
DEFAULTS
Secondary Sign →
No
CHANGE BACK