Service manual

Setting Communications 5-3
Setting the Word Length
Word length specifies the number of bits the printer uses to define a character.
To access this setting, from the Main Menu select Setup, Serial Comm. Then, follow
these steps.
1. Press  or  until you see Word Length.
2. Press CHANGE to highlight the word length options. The current setting is shown.
3. Press  or  to scroll through the word length options.
4. When you see the word length you need, press SET to save the change. Press
CANCEL to leave the word length unchanged.
5. Press BACK until you return to the Home/Online screen.
SERIAL COMM
← Word Length →
8
CHANGE BACK
SERIAL COMM
Word Length
← 8 →
SET CANCE
L
SERIAL COMM
← Word Length →
8
CHANGE BACK