Service manual

5-2 Operator's Handbook
Setting the Baud Rate
Baud rate is the speed, in bits per second, at which the printer sends and receives data.
To change the setting, from the Main Menu select Setup, Port Settings, Serial Comm,
then, follow these steps.
1. Press  or  until you see Baud Rate.
2. Press CHANGE to highlight the baud rate options. The current setting is shown.
3. Press  or  to scroll through the baud rate options.
4. When you see the baud rate you need, press SET to save the change. Press
CANCEL to leave the baud rate unchanged.
5. Press BACK until you return to the Home/Online screen.
SERIAL COMM
Baud Rate →
9600
CHANGE BACK
SERIAL COMM
Baud Rate
← 9600 →
SET CANCEL
SERIAL COMM
Baud Rate →
9600
CHANGE BAC
K