Service manual

Setting Supply Options 4-13
Using Batch Separators
A batch separator is an extra tag printed in between batches with a pinstripe pattern. For
continuous supply, the batch separator is always six inches long. The name of the batch
is shown on the batch separator.
Note: Changing this setting only effects new formats sent to the printer.
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow
these steps.
1. Press  or  until you see Separators.
2. Press CHANGE to highlight the separator options. The current setting is shown.
3. Press  or  to view the separator options.
4. When you see the separator option you need, press SET to save the change. Press
CANCEL to leave the separator option unchanged.
5. Press BACK until you return to the Home/Online screen.
Batch Separator
SUPPLY
Separators
No →
SET CANCEL
SUPPLY
← Separators →
No
CHANGE CANCE
L
SUPPLY
← Separators →
No
CHANGE BACK