Service manual

Setting Supply Options 4-11
Setting the Dispense Position
This function adjusts the stopping point of the label.
To access this setting, from the Main Menu, select Setup, Supply, then Positioning.
Follow these steps.
1. Press  or  until you see Dispense Pos.
2. Press CHANGE to highlight the dispense positioning options. The current setting is
shown.
3. Press  or  to increment/decrement the dispense position.
Note: Pressing the left function button changes the increment/decrement amount
(changes by 1, 10, or 100).
4. When you see the dispense position you need, press SET to save the change. Press
CANCEL to leave the dispense position unchanged.
5. Press BACK until you return to the Home/Online screen.
POSITIONING
← Dispense Pos →
65
CHANGE CANCE
L
POSITIONING
Dispense Pos
[50/200] 65
10 SET CANCE
L
POSITIONING
← Dispense Pos →
65
CHANGE BACK