Service manual

4-8 Operator's Handbook

Changing the Position Settings

This menu includes selections to change the print, supply, margin, dispense, and

backfeed distance positions. To change these settings, from the Main Menu, select Setup,

Supply, Positioning.

Setting the Print Position

This function adjusts the vertical data printing position. Adjust the position if the print is

too close to the top or bottom of the supply, or overtypes the pre-printed area. One dot

equals 0.0049 inch.

 If the data is too close to the bottom,

increase the number.

 If the data is too close to the top,

decrease the number.

1. Press  or  until you see Print Pos.

2. Press CHANGE to highlight the print positioning options.

3. Press  or  to increment/decrement the print position.

Note: Pressing the left function button changes the increment/decrement amount

(changes by 1, 10, or 100).

4. When you see the print position you need, press SET to save the change. Press

CANCEL to leave the print position unchanged.

5. Press BACK until you return to the Home/Online screen.

Note: Changing this setting only effects new formats sent to the printer.

POSITIONING

← Print Pos →

CHANGE CANCEL

POSITIONING

Print Pos

[-450/450] 0

1 SET CANCEL

POSITIONING

Print Pos →

CHANGE BACK