Service manual

Setting Supply Options 4-7
Setting the Backfeed
With backfeed turned on, the printer moves the supply backwards before printing.
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow
these steps.
1. Press  or  until you see Backfeed.
2. Press CHANGE to highlight the backfeed options. The current setting is shown.
3. Press  or  to scroll through the backfeed options.
4. When you see the backfeed option you need, press SET to save the change. Press
CANCEL to leave the backfeed option unchanged.
5. Press BACK until you return to the Home/Online screen.
Note: If you choose Yes, make sure you use the Positioning menu options to set the
backfeed distance. See “Setting the Backfeed Distance
” for more information.
SUPPLY
Backfeed →
Yes
CHANGE BACK
SUPPLY
Backfeed
Yes →
SET CANCEL
SUPPLY
Backfeed →
Yes
CHANGE BACK