Service manual

4-6 Operator's Handbook
Setting the Feed Mode
You can use continuous, on-demand, or liner take-up printing. On-demand printing allows
you to remove a label before printing the next one. Liner take-up collects the liner on a
take-up reel located inside the printer’s cover. See “Using Optional Liner Take-Up
” for
more information.
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow
these steps.
1. Press  or  until you see Feed Mode.
2. Press CHANGE to highlight the feed mode options. The current setting is shown.
3. Press  or  to scroll through the feed mode options.
4. When you see the feed mode option you need, press SET to save the change. Press
CANCEL to leave the feed mode option unchanged.
5. Press BACK until you return to the Home/Online screen.
SUPPLY
Feed Mode→
CHANGE BACK
SUPPLY
Feed Mode
← On-Demand →
SET CANCE
L
SUPPLY
Feed Mode →
On-Demand
CHANGE BACK