Service manual

Setting Supply Options 4-5
Setting the Speed
You can change the print speed for bar codes or graphics. If you select "default", formats
with serial bar codes automatically print at 2.5 ips and formats with parallel bar codes
print at 6.0 ips.
Note: If you change the speed, you must resend your formats or turn the printer off and
back on before the change takes effect.
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow
these steps.
1. Press  or  until you see Speed.
2. Press CHANGE to highlight the speed options. The current setting is shown.
3. Press  or  to scroll through the speed setting options.
4. When you see the speed option you need, press SET to save the change. Press
CANCEL to leave the speed option unchanged.
5. Press BACK until you return to the Home/Online screen.
SUPPLY
Speed →
Default
CHANGE BACK
SUPPLY
Speed
2.5 IPS →
SET CANCEL
SUPPLY
Speed →
2.5 IPS
CHANGE BACK