Service manual

Setting Supply Options 4-1
SETTING SUPPLY OPTIONS
This chapter explains how to select the supply type, ribbon, speed, feed mode,
backfeed, print position, supply position, margin position, cut position, dispense position,
backfeed distance, separators, skip index mode, rotate image, and print contrast.
Main Menu
Cancel
All Online
Batch
Entry
Repeat
Batch
Format
Options Setup Scripts Diagnostics
Supply Contrast Defaults
Port
Settings
Flash
Memory
RT
Clock Interpreter
Supply
Type
Ribbon Speed Feed
Mode
Backfeed Positioning Separators Skip Index Rotate
Image
Your System Administrator may limit access to this menu to prevent changes. You are
prompted to enter a password if password protection is turned on. To continue, ask your
System Administrator for the password.
The supply options are listed in the table below.
Option Choices Default
Supply Type Aperture/Die Cut/Black Mark/Continuous Die Cut
Ribbon No/Yes/High Energy Yes
Speed 2.5/4.0/6.0/Default Default
Feed Mode Continuous/On-Demand/Liner take-up Continuous
Backfeed Off/On Off
Print Position -450 to +450 0
Supply Position -300 to 300 0
Margin Position -99 to 99 0
Dispense Position 50 to 200 65
Backfeed Distance 10 to 100 65
Separators No/Yes/Long No
Skip Index No/Yes No
Rotate Image No/Yes No
To exit an option without changing the setting, press CANCEL.
4
PASSWORD
*********
ENTER BACK