Service manual

2-10 Operator's Handbook
Using the Optional Tear Bar
The tear bar is optional and must be purchased separately. It can only be used with peel
mode.
Slide the supply between the tear bar and peel bar. It may be easier if you cut or fold
one corner of the supply first.
Notes:
 The tear bar can only be used when supply is loaded for peel mode. Do not tear both
label and liner at the same time.
 Tear labels against the tear bar.
 Tags can not be used with the tear bar.
 For ease of tearing, use 3-inch long by 1-inch wide supplies that are less than 5 mils thick.
Tear Edge
Liner
Peel Bar
Tear Bar