Instruction manual

L7. thickness Using the chart below for reference, write the line thickness
(1 to 99) in box L7. Line thickness fills upward on horizontal lines, or to the
right on vertical lines. Measured in dots.
L8. “pattern” Line pattern. Enter "".
Example L,S,110,30,110,150,10,"" p
Defines a horizontal line field as a segment starting at row 110, column 30
and ending at row 110, column 150. The line thickness is 10 dots.
Defining Box Fields
Use boxes to form borders or highlight items of interest. Define each box
field separately. This field is not assigned a field number, but is counted as
a field (keep this in mind, as the printer allows a maximum of 1000 fields per
format). You can define any line length and a thickness up to 99 dots, as
long as the solid black print does not exceed 30 percent of any given square
inch of the label.
3-30 Defining Fields