Instruction manual

Example C,30,10,0,1,1,1,B,L,0,0,"MADE IN USA",0 p
Defines a constant text field starting at row 30, column 10. It does not have
any additional inter-character gap. The Standard font is used without any
additional magnification. The printing is black on white and left justified.
No field or character rotation is used. “MADE IN USA” is printed in this
field. The internal symbol set is used.
Defining Line Fields
Use lines to form borders and mark out original prices. Define each line
separately. This field is not assigned a field number, but is counted as a
field (keep this in mind, as the printer allows a maximum of 1000 fields per
format). You can define any line length and a thickness up to 99 dots, as
long as the solid black print does not exceed 30 percent of any given square
inch of the label.
Line Types
You can create horizontal and vertical lines. There are two ways to define
lines.
Segments You choose the starting point and ending point.
Vectors You choose the starting point, the angle, and the length
of the line.
Syntax L,type,row,column,angle/end row,length/
end col,thickness,"pattern" p
L1. L Line Field.
L2. type Type of line. Only vertical and horizontal lines are
supported. Options:
S Segment. You choose the starting point and
ending point.
V Vector. You choose the starting point, angle, and l
ength.
L3. row Distance from bottom of print area to the starting point.
3-28 Defining Fields