Instruction manual

Distance from the lower left edge of the print area to
the pivot point. Use the previous table for values.
Allow a minimum of 1/10 inch between the scan edge
of bar code and label edges or other data.
If using the optional verifier, allow a minimum of 1.3
inches (33 mm) between the bar code and the top of
the label. See “Determining the Print Area” in
Chapter 1 for more information.
B7. font Bar code. Options:
1 UPCA
2 UPCE
3 Interleaved 2 of 5
4 Code 39 (no check digit)
5 Codabar
6 EAN8
7 EAN13
8 Code 128
9 MSI
10 UPCA +2
11 UPCA +5
12 UPCE +2
13 UPCE +5
14 EAN8 +2
15 EAN8 +5
16 EAN13 +2
17 EAN13 +5
22 POSTNET
23 Code 93
31 Code 16K
32 PDF417
33 MaxiCode
35 Data Matrix (ECC-200)
36 Quick Response
37 Aztec
38 GS1 DataBar
40 Code 39 (MOD 43 check digit)
41 UPCA & Price CD
44 EAN13 & Price CD
50 Interleaved 2 of 5 with Barrier Bar
B8. density Bar code density. Use the following table for other bar codes.
3-12 Defining Fields