Instruction manual

Note: The Standard, Reduced, Bold, OCRA and HR fonts only support
the Internal Symbol Set (0). The CG Triumvirate™ typefaces only
support the ANSI and DOS Code Page 437 and 850 Symbol Sets.
The scalable font (font#50) does not support Code Page 1256
(Arabic). Code pages 852-860 and 1250-1258 are for downloaded
TrueType fonts or the scalable font. Code pages 102-110 require
the memory expansion option and a downloaded International
TrueType font. TrueType fonts are designed to be regionally
specific; therefore, all code pages may not be supported in a given
font. See Appendix C, “Symbol Sets/ Code Pages” for more
information.
If using symbol set 110 (Unicode UTF-8), set the MPCL control
characters (start of header, etc.) to decimal values between 0 and
128; otherwise, errors may occur with the Unicode data entered.
See Chapter 2, "Configuring the Printer" for more information
about the MPCL control characters.
Example T,2,10,V,250,80,0,1,1,1,B,C,0,0,0 p
Defines a text field (field #2) with a variable length of up to 10 characters.
The field begins at row 250, column 80. There is no additional gap between
characters, and the Standard font is used without any additional
magnification. The printing is black on white and centered. No field or
character rotation is used. The internal symbol set is used.
Defining Bar Code Fields
Each bar code field requires a separate definition.
Syntax B,field#,# of char,fix/var,row,column,
font,density,height,text,alignment,field rot,
type,sep_height,segment p
B1. B Bar Code Field.
B2. field# Unique number from 1 to 999 to identify this field.
B3. # of char Maximum number of characters. If the bar code uses a check digit, allow
an extra character for the check digit. The actual maximum number of
characters is limited by the size of the label and bar code density. Range:
0 to 2710.
3-8 Defining Fields