Instruction manual

Use the formula below to calculate the approximate
image buffer size.
21K x Length (for 203 dpi) OR
46K x Length (for 300 dpi)
Length is the length of your label in inches.
203 DPI Example 21K x 25 = 525
(Multiply by 10 and round up to the next whole number if
necessary)
525K x 10 = 5250
Enter 5250 for your Image buffer.
300 DPI Example 46K x 26.75 = 1230.5
(Multiply by 10 and round up to the next whole number if
necessary)
1230.5 x 10 = 12305
Enter 12305 for your Image buffer.
Format Buffer Used to store formats, batch data, and graphics. Use
the following formula to calculate the required format
buffer size:
Linecount x 50/1024
Linecount is the number of lines in your format packet
including the format header and all the options.
The result of the above calculation is in kilobytes.
Formats remain in memory when you turn off the printer.
2-28 Configuring the Printer